Ceiling Suspension System (T Grids) – A system of metal members, designed to support a suspended ceiling, typically an acoustical ceiling. Also may be designed to accommodate lighting fixtures or air diffusers. The T Bar Lay In Grid System consists of only one tile per module with both the main runner and cross runner exposed.
All edges of the tile are supported by the exposed T bars reducing the chance of visible damage after accessing the ceiling cavity. It is the ideal solution for suburban offices, hospitals and schools offering a simple system that is easy to maintain and install.
We provide you the fully automatic machine with in-line punching of T-bars in the various custom models and sizes. The ceiling T-Bar, T runner roll forming machines are consisted of a Main T-Bar Machine, a Cross T-Bar Machine and an Angle Roll forming machine, for manufacture main T-Bar, Cross-T-Bar, wall angle, ceiling panel.
The type of machinery with non-stop in line servo trace system for punching and cutting off product at length by one time process after profile forming. Products are with precise length and holes pitch. The come out products are ready for package.
Automatic Main T-bar cold roll forming machine in line punch
We are the few roll forming machines supplier in china have the ability to design automatic T bar roll forming line with our full experience.
Main T: Two heads and middle holes are punched and cut-off at the same time after forming. Main ceiling tee length is 3.6m (12feet).
Automatic Main T-bar (Tee) Cold Roll Forming Machine In Line Punch Complete line consist of Single or Dual Head Type de-coiler, Roll forming main machine, Hydraulic, Automatic Punching and cut-off Device, run-out table, PLC Automatic Control Cabinet.
| Main T-bar Cold Roll Forming Machine Parameters |
Forming Roller Stations: |
15----18 Stations |
Forming Roller shaft: |
φ36mm |
Forming rollers |
GCr15, Quenching, hardness HRC56-62º |
Forming Speed: |
12 meters / min |
Main motor: |
5.5kw |
Sheet Thickness: |
0.3 to 0.35 mm |
Cutting mode: |
Hydraulic automatic punching and cutting machine |
Accessories: |
Dies of (3 in one) for Main T |
Dies of notching both side for Main T |
The following Main T-bar Profile is as reference
Main T-BAR: METAL THICKNESS: 0.28mm; LENGTH: 3,600mm
 
Automatic Cross T-bar cold roll forming machine in line punch
We are the few roll forming machines supplier in china have the ability to design automatic T bar roll forming line with our full experience.
Cross T: Heads and middle hole are punched and cut off at the same time after forming. The cross t length is at 0.6m or 1.2m.
Automatic Cross T-bar Cold Roll Forming Machine in Line Punch consist of Single or Dual Head Type de-coiler, Roll forming main machine, Hydraulic, Automatic Punching and cut-off Device, run-out table, PLC Automatic Control Cabinet, etc.
| Automatic Cross T-bar Cold Roll Forming Machine Parameters |
Line structure |
Portal-type frame style |
Forming Roller Stations: |
15----18 Stations |
Forming Roller shaft: |
φ36mm |
Forming rollers |
GCr15, Quenching, hardness HRC56-62º |
Forming Speed: |
12 meters / min |
Main motor: |
5.5kw |
Sheet Thickness: |
0.3 to 0.35 mm |
Cutting mode: |
Hydraulic automatic punching and cutting machine |
Control mode |
PLC |
Accessories: |
Dies of notching both side for Cross T
Dies of notching both side for Cross T
Dies of middle hole for Cross T
Dies of overlap for Cross T |
The following Cross T-bar (Tee) Profile is as reference
Cross T-BAR: METAL THICKNESS: 0.28mm; LENGTH: 600mm, 1,200mm
 
Automatic Wall Angle Roll Forming Machine
Wall Angle Cold Roll Forming Machine (Ceiling Angle Molding machine) consists of Single or Dual Head Type Un-coiler, Roll forming main machine, Hydraulic, Automatic Punching and cut-off Device, PLC Automatic Control Cabinet, etc.
The type of machinery is available with CL type (change-table-set) with pre-punching press for L - angle and W -angle with tab.
Ceiling Angle Molding (Wall Angle) Cold Roll Forming Machine Parameters |
Line structure |
Portal-type frame style |
Forming Roller Stations: |
10 Stations |
Forming Roller shaft: |
φ36mm |
Forming rollers |
GCr15, Quenching, hardness HRC56-62º |
Forming Speed: |
12 meters / min |
Main motor: |
5.5kw |
Sheet Thickness: |
0.3 to 0.35 mm |
Cutting mode: |
Hydraulic automatic punching and cutting machine |
Control mode |
PLC |
The following Wall Angle (Ceiling Angle Molding) Profile is as reference
Angle Molding: METAL THICKNESS: 0.45mm; LENGTH: 3,000mm
 
T bar
The Tee bar size is according to clients’ request. You are welcome to contact with us for the further details!
The economical T bar lines are consisted of the main tee forming machine, cross tee forming machine and angel forming machine.
Further we still can supply client the punching moulds for holes on t bar, and punching moulds for t bar ends.
T-Runner Suspended exposed ceiling grids
|
